back to overview

Nonwoven | 5875-FIN

CONSULTEX SYSTEM NONWOVEN SPRAY APPLICATOR


PROPOSAL NO. 5875-FIN

We have available the following equipment; subject to prior sale:

PROPOSAL NO. 5875-FIN

1 CONSULTEX SYSTEM NONWOVEN SPRAY APPLICATOR
Type IQ 141
Year 2010
Working width 2400 mm
Max spray rate per rotor carrier 3300 ml/m/min.
Compressed air 5 bar = 73 psi
consisting of:
1 Rotor carrier to include:
Stainless steel self supporting structure with covers
Drive motor with belt, totally enclosed IP 65 motor
Pneumatically operated adjustable Start/Stop cover and width
adjustment
Interconnecting tubing material to liquor supply system
Detachable rotor compartment
Stainless Steel Flow Monitor
Supply tank:
One removable stainless steel 60 liter tank, mounted in a solid
stainless steel frame
One variable speed AC motor driven pump for the chemical supply to
the Rotor Carrier
Necessary valves and plumbing for the operation of the system
One supply filter and one duplex filter with pressure sensors
Integrated control station:
Control and regulation of spray amount in grams / sqm (gsm) units
Control and regulation of automatic rinsing program for the rotor
carrier and plumbing
Controls for all available options, parameters, and input functions
Automatic adjustment of add-on rate according to machine speed
using line speed input
Color touch screen control panel with. LCD display and diagnostic
center by Siemens
Profibus connection
Mounting Frame and Dryer for applicator:
Working width 2400 mm
Face width 2600 mm
Product: Nonwoven 300 gsm - 700 gsm
Operating Speed: up to 25 meters/min.
Paint: Menzel Blue RAL 5015

The Mounting Frame and Dryer include:
Sturdy steel framework with cross members and supports
One entrance driven traction roll
3 aluminum idler rolls in free turning bearings
Provisions for mounting the Consultex spray equipment
Provisions for mounting 3 dryers / heaters and future expansion of
additional 2 dryers / heaters
Drying section to include:
Aluminized steel framework
3 heater panels operating temp. 0-870ºC, each approx. 24"x102"
Air plenums to connect all heater panels to air supply / blower
SCR control for heaters to facilitate temperature-control
Invertors to control the air flow at each of the blowers.


Location: North America
Available: Immediately


Your consideration and prompt response will be most appreciated.