back to overview

Nonwoven | 5962-NON

LOT of VERY MODERN NONWOVEN NEEDLEPUNCH LOOMS, PER-NEEDLE AND FINISH NEEDLELOOMS


PROPOSAL NO. 5962-NON

We have available the following NONWOVEN MACHINES; subject to prior sale:

PROPOSAL NO.5962-NON

PRE-NEEDLELOOMS:

  1    CIMA PRE-NEEDLE NONWOVEN LOOM
        Year 2006
        Working width 3500 mm
        Single Board downstroke
        Stroke 70 mm
        3000 Needles/m
        Price:    ex-mill floor    EURO    

  1    AUTOMATEX PRE-NEEDLE NONWOVEN LOOM
        Type PR-50/T
        Year 1997
        Working width 4200 mm
        Single Board downstroke
        Stroke 55 mm
        5000 Needles/m
        Price:    ex-mill floor    EURO    

  1    AUTOMATEX PRE-NEEDLE NONWOVEN LOOM
        Year 1993
        Working width 4000 mm
        Single Board downstroke
        4000 Needles/m
        Price:    ex-mill floor    EURO    

FINISH NEEDLE LOOMS:

  1    DILO HYPERPUNCH FINISHING NEEDLELOOM
        Model Di-Loom
        Type OUG –II HVSXL 41
        Year 2005
        Working width 4100 mm
        with CBF
        2 Boards upstroke, 2 Boards downstroke
        Stroke 60 mm
        4 x 6286 Needles/m
        1325 Strokes/min.
        Price:    ex-mill floor    EURO    

  1    DILO HYPERPUNCH FINISHING NEEDLELOOM
        Model Di-Loom
        Type OUG –II HVASCL 35
        Year 2007
        Working width 3500 mm
        with CBF, Type DBF 35/5 with 3 Drafting Rollers
        2 Boards upstroke, 2 Boards downstroke
        Stroke 40 mm
        4 x 6286 Needles/m
        2050 Strokes/min.
        Price:    ex-mill floor    EURO    

  1    DILO HYPERPUNCH FINISHING NEEDLELOOM
        Model Di-Loom
        Type OD –II HSCL 35
        Year 2007
        Working width 3500 mm
        with CBF, Type DBF 35/5 with 3 Drafting Rollers
        2 Boards downstroke
        Stroke 40 mm
        2 x 6286 Needles/m
        2050 Strokes/min.
        Price:    ex-mill floor    EURO    

  1    DILO HYPERPUNCH FINISHING NEEDLELOOM
        Model Di-Loom
        Type UD –II HSCL 35
        Year 2007
        Working width 3500 mm
        2 Boards upstroke
        Stroke 40 mm
        2 x 6286 Needles/m
        2050 Strokes/min.
        Price:    ex-mill floor    EURO    

  2    DILO CYCLOPUNCH FINISHING NEEDLELOOMS
        Model Di-Loom
        Type OUG –II CPSGL 25
        Year 2007
        Working width 2500 mm
        2 Boards upstroke, 2 Boards downstroke
        Stroke 24 mm
        4 x 20.000 Needles/m
        1200 Strokes/min.
        each loom is avail. seperatly
        Price:    ex-mill floor    EURO    

  1    ASSELIN FINISHING NEEDLELOOM
        Type A50-SD2
        Year 1999
        Working width 3600 mm
        2 Boards downstroke
        Stroke 60 mm
        2 x 12.000 Needles/m
        Price:    ex-mill floor    EURO    

        Location:    EUROPE
        Available:    Immediately

Your consideration and prompt response will be most appreciated.