back to overview

Spinning | 6188-BB

Starlinger PP Extrusion Line with 5 Starlinger Circular Tape Weaving Looms, Year 2013


PROPOSAL NO. 6188-BB

We have available for sale the following Starlinger PP Extrusion Line with 5 Starlinger Circular Tape Weaving Looms, Year 2013 , subject to prior sale:

PROPOSAL NO. 6188-BB

    1    STARLINGER POLYPROPYLENE EXTRUSION LINE
        Model Starex 700S
        Year:    2003
        Working width 700 mm
        Die width 800 mm
        Speed 420 m/min
        Consisting of:
        Starlinger Extruder
        Model E 90.30D
        90 mm screw diameter
        30 D screw length
        330 Kg/h capacity
        Single screw type with 6 Heating Zones
        Max. 175 rpm screw speed
        138 kW DC Drive with 37,8 kW Heating
        Temperature controlled Lock-Out Device
        Granulate Feeding and 3-Component Dosing/Mixing Unit
        with Vacuum Feeders and elliptic dosing unit
        Automatic Filter System
        Filter Screen Feeding by pressure dependent or manually via
        Temperature and Time Controlled
        Working pressure max. 180 bar
        Melt Pressure Gauge
        With Static Mixer, Connecting flange to flat die, fixture for flat die
        Flat Die
        With reversible die lip
        800 mm Die width
        Die lip aperture 0,1 – 1 mm
        Heating Capacity 10 kW
        4 Control Zones
        Edge Trim Recycling
        For direct return of narrow edge trims to the extruder
        Water Quench with integrated holding unit
        Quench Tank 500 l capacity incl. pump and heat exchanger
        Water temperature Control
        Film Take-off nip rollers, frequency driven Motors
        Slitting Unit with cross adjustment and film oscillating system
        Final tape width 1,7 – 5 mm
        Holding unit with 2 cylinders and 2 nip rolls frequency controlled
        Slide Frame with integrated control panel
        Film Take-off Roller
        For high cutting tensions with variable drive
        Special water Removal systems for high Speeds
        Hot Air Oven
        Length of heating Zone 5,4 m
        Air flow regulation with fans, air speed 20 m/sec.
        Air Lock System
        Standard Stretching Section with 4 Godets
        2 Standard Godets, dia. 350 mm
        2 Cooling Godets, dia. 350 mm
        2 Nip Rolls
        Static electricity eliminator
        Tape Extration- Vacuum System
        Designed as start-up aid and broken tape catcher
        STACOFIL WINDER
        Model 200A – SFA 0000
        125 Pos.
        Precision Take up Cross Winder for flat and fibrillated polyolefine
        Tapes on Cylindrical Cores
        Each Spindle driven by 3 phase AC-Motor with inv. Speed control
        3-Phase Inverter and Balancer with adjustable Tension Control
        Automatic Motor-Switch off when brake is activated
        Quick Clamping System by an expansion spindle
        Yarn Catching device on tip of the spindle
        Tape Guide and high precision traverse mechanism
        Tape Width     1,7- 5 mm
        Speed     max. 420 m/min.
        Traverse     200 mm
        Ratio    1: 14,32
        Core dimensions warp and weft bobbins
        Inside dia.     35 mm
        Outside dia.     40 mm
        Length     218 mm
        Maximum Bobbin diameter 180 mm

    1    STARLINGER CIRCULAR WEAVING LOOM
        (specially design to weave endless tubular or flat cloth
        out of PP or HDPE tapes)
        Type Stacoloom SL 61 HD
        Year 2011
        Working width- double flat 800-1200 mm
        at reduced pick rate 1110-1200 mm
        Number of Shuttles 6
        Weft insertion 660 per min. (depending on material)
        Weft density 20-75 /10 cm
        Revolutions 110 per min.
        Number of tapes 1152 pcs.
        Creel Positions 1152 pcs.
        Core dimensions of Warp and weft bobbins:
         inside dia. 35 mm
         max. outside dia. 42 mm
         Length 218 mm
        Max. diameter of warp package 160 mm
        Max. diameter of weft package 115 mm
        Length of Traverse 200 mm
        Surface Winder
        Cloth width 1200 mm
        Max. roll diameter 1200 mm
        Inside diameter of core 102 mm
        Outside diameter of core 115 mm
        Winder motor rating 0,55 kW
        Main motor rating 4 kW
        Connected load 7,5 kVA
        Average Power Consumption approx.. 3,9 kW
        Weight (approx.):
        Basic Machine 2000 kg
        Warp Bobbin Creel (empty) 2x 150 kg

    4    STARLINGER CIRCULAR WEAVING LOOMS
        (specially design to weave endless tubular or flat cloth
        out of PP or HDPE tapes)
        Type Stacoloom SL 62 HD
        Year 2013
        Working width- double flat 900-1500 mm
        at reduced pick rate 1410-1500 mm
        Number of Shuttles 6
        Weft insertion 660 per min. (depending on material)
        Weft density 20-75 /10 cm
        Revolutions 110 per min.
        Number of tapes 1280 pcs.
        Creel Positions 1296 pcs.
        Core dimensions of Warp and weft bobbins:
         inside dia. 35 mm
         max. outside dia. 42 mm
         Length 218 mm
        Max. diameter of warp package 160 mm
        Max. diameter of weft package 115 mm
        Length of Traverse 200 mm
        Surface Winder
        Cloth width 1500 mm
        Max. roll diameter 1200 mm
        Inside diameter of core 102 mm
        Outside diameter of core 115 mm
        Winder motor rating 0,6 kW
        Main motor rating 7,5 kW
        Connected load 8,5 kVA
        Average Power Consumption approx.. 4,3 kW
        Weight (approx.):
        Basic Machine 2800 kg
        Warp Bobbin Creel (empty) 2x 170 kg


        Location:    Europe
        Available:    Immediately
        PRICE:        ex works                 


Your consideration and prompt response will be most appreciated.